FLORIDA EQUIPMENT SERVICE 6712 Highway Avenue Jacksonville, FL  32254

| Home | Argo Pg 1 | Argo Pg 2 | | Argo Pg 3 | Mahle Filters | Mann Filters | Stauff Filters |

| Argo Hytos Directional Control Valves |

Argo Hytos GP1-P, GP1-T, GP1Q Series Gear Pumps

Argo Hytos gear pumps feature high reliability, low noise level, and high volumetric efficiency. The gear pumps consist of two intermeshing gears. One of the gears is connected to the driveshaft. The gear pumps are available in left or right hand rotation on the drive shaft for generating flow and pressure. Argo Hytos gear pumps have optimized efficiency through pressurized internal seal technology. Floating bushings with special bearings are pressure dependent and push against the gears to minimize gap clearance between bushings and gears and seal the gears axially. Radial sealing is accomplished by forcing the gears against the body. The gear pumps have 2-bolt SAE mounting flange and keyed shaft.   

GP1-P Series Gear Pump Specifications:

Pmax: 2300 to 4350 PSI    Qmax: 1.0 to 5.6 GPM

Nominal displacement range: | 0.049 cinch/rev (0.8cm3/rev) | 0.073 cinch/rev (1.2cm3/rev) | 0.098 cinch/rev (1.6cm3/rev) | 0.128cinch/rev (2.1 cm3/rev) |

0.153 cinch/rev (2.5 cm3/rev) | 0.201 cinch/rev (3.3 cm3/rev) | 0.220 cinch/rev (3.6 cm3/rev) | 0.269 cinch/rev (4.4 cm3/rev) | 0.293 cinch/rev (4.8 cm3/rev) |

0.354 cinch/rev (5.8 cm3/rev) | 0.378 cinch/rev (6.2 cm3/rev) | 0.482 cinch/rev (7.9 cm3/rev) | 

Rotation: available in clockwise and counterclockwise

Cylindrical keyed shaft: 3./8"

Seals: NBR, others available on request

Flange: SAE AA (SAE J744C)

Pressure ports: O-ring ports to SAE J1926 (ISO 11926)

Suction ports: O-ring ports to SAE J1926 (ISO11926)

GPI-T Series Gear Pump Specifications:

Pmax: 1700 to 4200 PSI    Qmax: 1.0 to 17.0 GPM

Nominal displacement range: | 0.244 cinch/rev (4 cm3/rev) | 0.305 cinch/rev ( 5 cm3/rev) | 0.385 cinch/rev (6.3 cm3/rev) | 0.488 cinch/rev (8 cm3/rev) |

0.610 cinch/rev (10 cm3/rev) | 0.763 cinch/rev (12.5 cm3/rev) | 0.976 cinch/rev (16 cm3/rev) | 1.221 cinch/rev (20 cm3/rev) | 1.343 cinch/rev (22 cm3/rev) |

1.526 cinch/rev (25 cm3/rev) | 1.953 cinch/rev (32 cm3/rev) |

Rotation: available in clockwise and counter clockwise

Cylindrical keyed shaft: 5/8"

Seals: NBR, others available on request

Flange: SAE A (SAE J744C)

Pressure ports: O-ring ports to SAE J1926 (ISO 11926)

Suction ports: O-ring ports to SAE J1926 (ISO 11926)   

GP1-Q Series Gear Pump Specifications:

Pmax: 2900 to 4500 PSI    Qmax: 7.1 to 42.8 GPM

Nominal displacement range: | 0.610 cinch/rev (10cm3/rev) | 1.037 cinch/rev (17 cm3/rev) | 1.648 cinch/rev (27 cm3/rev) | 2.075 cinch/rev (34 cm3/rev) |

2.624 cinch/rev (43 cm3/rev) | 3.112 cinch/rev (51 cm3/rev) | 3.723 cinch/rev (61 cm3/rev) | 4.333 cinch/rev (71 cm3/rev) | 5.004 cinch/rev (82 cm3/rev) |

6.102 cinch/rev (100 cm3/rev) |

Rotation: available in clockwise and counter clockwise

Cylindrical keyed shaft: 7/8"

Seals: NBR, others available upon request

Flange: SAE B (SAE J744C)

Pressure ports: O-ring ports to SAE J1926 (ISO 11926)

Suction ports: Flange face to SAE J518